Precision Stamping Die Design & Manufacturing / Precision Stamping

Thin Sheet. High Precision.
Mass Production.

From blanking 0.03 mm hardened ribbon steel to stainless steel flat springs, full-perimeter shearing of aluminum, and complex terminal forming.
From die design and manufacturing to mass production — we welcome inquiries starting from a single prototype.

NB Seimitsu Co., Ltd.PRECISION STAMPING DIES & STAMPING
1974Founded
t0.03mmThin hardened-steel blanking
Japan & ThailandTwo production bases
ISO 9001Certified in 2019

Head Office & Factory

3831 Kamiide, Fujinomiya, Shizuoka 418-0103, Japan
Tel +81-544-54-2121 / Fax +81-544-54-2120

Thai Factory

NB Precision (Thailand) Co., Ltd.
Rojana Industrial Park Zone 3, Ayutthaya

01

Message

Message

Since its founding in 1974, NB Seimitsu Co., Ltd. has been dedicated to precision stamping dies and precision stamping.

Our technology originates in blanking camera aperture blades: cutting hardened ribbon steel, a hard and thin material, with high precision. Continually refining this technology now supports the manufacture of parts for a wide range of fields, including automotive parts, optical components, and connectors and terminals.

In 1999 we established a production base in Ayutthaya, Thailand, building a system that delivers parts of the same quality from our two bases in Japan and Thailand. By designing and building dies in-house and handling everything through to mass production, we can propose the optimal process for each customer's challenge. This is our strength.

Since becoming President and Representative Director in 2020, I have placed "customer satisfaction" and "technology and quality" at the core of our management, while renewing equipment and passing on our skills. From a single drawing or a single prototype, we will sincerely support your manufacturing.

We look forward to your continued support.

Yosuke Nishimura
President & Representative Director, NB Seimitsu Co., Ltd.

Yosuke Nishimura
President & Representative Director, NB Seimitsu Co., Ltd.
Managing Director, NB Precision (Thailand) Co., Ltd.

Graduated from Tokai University, School of Engineering, Department of Precision Mechanical Engineering (1996)
Hobbies: travel and fishing
Also designs precision press dies himself

NB Seimitsu Co., Ltd.2
02

Three Reasons to Choose NB Seimitsu

Why NB Seimitsu

REASON 01Precision Blanking of Thin, Hard Materials

A technology refined since our founding through blanking camera aperture blades. Blanking of hardened ribbon steel t0.03–0.05 mm, stainless steel (SUS301CSP / SUS304CSP) flat springs, and full-perimeter shearing of aluminum A5052P to minimize burrs and dents — the more difficult the material, the more we can offer.

REASON 02Integrated Production from Die to Mass Production

We design and build our dies in-house and feed mass-production results back into the next design. Stamping, cleaning, surface treatment, caulking and simple assembly, and inspection with vision measuring systems are all managed in-house. From a single prototype to mass production.

REASON 03Same Quality in Japan and Thailand

Our production base in Ayutthaya, Thailand, was established in 1999. It performs 15–200 ton stamping and die manufacturing to the same quality standards as Japan. We can advise whether production in Japan or Thailand suits your needs.

Feeding Production Results Back into Die Design

We perform die design, die manufacturing, and mass-production stamping under one roof.
By feeding actual production results back into die design, we build dies that achieve stable, reliable mass production,
while improving precision, quality, cost, and supply stability.

Industries We Serve

Automotive PartsTerminals, brackets, flat springs, etc.
Optical ComponentsAperture blades, aperture cams, spacers
Connectors & TerminalsCombined hemming, curling and coining
Industrial & Electrical EquipmentFlat springs, small precision parts

From Inquiry to Delivery

STEP 01Send DrawingsWith material, thickness and quantity, a single drawing is enough to start.
STEP 02Proposal & QuoteWe propose single-stage or progressive dies and compare production in Japan and Thailand.
STEP 03Die Design & BuildDesigned and built in-house, with mass production in mind.
STEP 04Prototype & EvaluationWe check dimensions and quality on prototypes and refine as needed.
STEP 05Mass Production & DeliveryWe deliver mass-produced parts of stable quality from Japan or Thailand.
NB Seimitsu Co., Ltd.3
03

Core Technologies

Technologies

Precision Blanking of Hard, Thin Materials

Our origin is blanking camera aperture blades. Since our founding, we have refined the technology to blank hardened ribbon steel, a hard and thin material, with precision to the 0.001 mm level. Applying this technology, we also handle SUS (SUS301CSP / SUS304CSP) flat springs, full-perimeter shearing of aluminum, and combined hemming, curling and coining of terminals. We design and build our dies in-house and feed mass-production results back into die design.

ProcessMaterialThicknessFeatures
Thin-sheet blankingHardened ribbon steel, phosphor bronze, brass0.02–0.05 mmCombines die precision and press precision
Aluminum full-perimeter shearingA50520.5–0.8 mmSuppresses burrs and dents; low-scratch degreasing
Terminal processing (various)Brass / copper alloys (tin-plated), SUS4300.4–0.8 mmCombined hemming, curling and coining
SUS flat springs & small electrical device partsSUS301CSP, SUS304CSP0.03–0.8 mmFine, intricate shapes
Drawing & bendingSPCC-SD, SUS304CP0.3–0.8 mmCombination of drawing and bending
Knurling (prototype)Copper (Cu)–0.5 mm pitch grid knurl
Blanking with adhesive tapeSUS430 + double-sided tape0.1 mmMetal and tape blanked in one operation
Thin-sheet blanking
Thin-sheet blanking
Aluminum full-perimeter shearing
Aluminum full-perimeter shearing
Terminal processing
Terminal processing
SUS flat springs & small electrical parts
SUS flat springs & small electrical parts
Drawing & bending
Drawing & bending
Knurling (prototype)
Knurling (prototype)
Blanking with adhesive tape
Blanking with adhesive tape

* As a thin-sheet record, we have blanked SUS material at t0.01 mm (prototype level; please consult us about mass production).

Integrated In-House Scope

Die design & manufacturing→Stamping→Cleaning→Surface treatment (coating, anodizing)→Caulking & simple assembly→Inspection

Our Approach to Quality

We operate a quality management system based on ISO 9001:2015 (certified in October 2019). Measurement with vision measuring systems minimizes inspector-dependent variation. See page 7 for our main measuring equipment.

NB Seimitsu Co., Ltd.4
04

Products

Product Examples

Representative products we have manufactured. Feel free to consult us about materials, thickness and processes.

Connectors & Terminals

Connectors & Terminals

Finished with combined hemming, curling and coining. Complex shapes are welcome.

  • Material: brass / copper alloy (tin-plated) t0.5–0.8 mm
  • Material: SUS430 t0.4 mm
Optical Components

Optical Components

Small parts such as aperture cams, spacers and wave washers, from small lots to mass production. Stamping, machining and coating are managed in-house. Our full-perimeter shearing of aluminum aperture cams is highly regarded.

  • Aperture cam: A5052 t0.5–1.2 mm
  • Wave washer: SUS301CSP t0.4 mm
Camera Aperture Blades

Camera Aperture Blades

Aperture blades made from thin hardened ribbon steel. Stamping, coating and dowel caulking are managed in-house. Blanking thin, hard materials is the technology we have refined since our founding.

  • Material: hardened ribbon steel t0.03–0.05 mm
Drawn & Bent Parts

Drawn & Bent Parts

Combined stamped parts that integrate drawing and bending.

  • Material: SPCC-SD t0.8 mm (upper photo)
  • Material: SUS304CP t0.3 mm (lower photo)
NB Seimitsu Co., Ltd.5
04

Products

Product Examples

Stainless Flat Springs & Small Electrical Parts

Stainless Flat Springs & Small Electrical Parts

Leave fine, intricate shapes to us.

  • Material: SUS301CSP / SUS304CSP t0.1–0.5 mm
Aluminum Stamped Parts

Aluminum Stamped Parts

Stamped parts applying the aluminum technology developed for camera aperture cams. Full-perimeter shearing suppresses burrs and prevents dents. Low-scratch degreasing after stamping and anodizing are managed in-house.

Thin-Sheet Blanked Parts

Thin-Sheet Blanked Parts

Stamped parts applying our technology for aperture blades (hardened ribbon steel) and adjustment rings (phosphor bronze, brass). Thin-sheet blanking depends on the precision of both the die and the press, and is one of our greatest strengths.

Shims & Spacers

Shims & Spacers

Shim rings and spacers for thickness adjustment, made with the thin-sheet blanking technology we developed for camera aperture blades.

  • Material: phosphor bronze, brass, nickel silver, aluminum, SK, resin sheet, etc. t0.02 mm and up
  • We also have a track record of blanking t0.01 mm sheet.
NB Seimitsu Co., Ltd.6
04

Products

Product Examples

Busbars

Busbars

Busbars made by bending copper sheet.

  • Material: copper (tin-plated) t1.6–2.0 mm
Large Stamped Parts

Large Stamped Parts

We also handle large stamped parts.

  • Material: electro-galvanized steel sheet, cold-rolled steel sheet

Send Us Your Drawing

Tell us the material, thickness and quantity, and we will propose a process and a quotation.

Tel +81-544-54-2121 (Mon–Fri 9:00–17:00 JST)

NB Seimitsu Co., Ltd.7
05

Main Equipment

Equipment

Main equipment at our head office factory (as of October 2026).

Production Equipment

EquipmentMakerModelQty
High-speed pressMitsui SeikiBSTA-183
High-speed pressMitsui SeikiBSTA-302
Servo pressAmadaSDE-80181
Servo pressAidaNC1-800D1
AC servo pressKomatsuH1F110-21
Direct-drive digital servo pressHoden SeimitsuZENFormer nano MPS410UD1
Double link-motion pressAmadaTPWL-1101
Link-motion pressAmadaTPL-60Si1
Crank pressAmadaTP-80C etc.9
Medium/high-speed pressAmadaTPH-60S etc.3
Precision levelerZerostarZSD-125 etc.6
Caulking machineCopalCRM-501
Vibratory barrel finisherChiptonCL-501
Rotary barrel finisherTokumitsuTM-4 etc.6
Bench latheKitamuraKL-161
Hydrocarbon cleaning system (NS100)ToseiTCH-45221
Automatic hydrocarbon cleaning system (NS100)CleanvyFVH2-3550CV1
Air compressorMitsui SeikiZV22ASi-R1

Measuring Equipment

EquipmentMakerModelQty
Vision measuring system (Quick Vision)MitutoyoQV-ELF250-PRO2
Vision measuring system (Quick Scope)MitutoyoQS-200Z2
High-precision image dimension measuring systemKeyenceLM-1000/11001
Image measuring systemKeyenceIM-65001
Profile projectorTopconBP-30 etc.3
Surface roughness testerMitutoyoSJ-4011

Die-Making Equipment

EquipmentMakerModelQty
CAD/CAMCamtasSPEEDY-MILL 2D3
Ultra-high-precision wire EDMMitsubishi ElectricMP24002
High-precision wire EDMMitsubishi ElectricPA-20M1
Small-hole EDMMitsubishi ElectricMEMH-8 etc.2
Sinker EDMMitsubishi ElectricEA-12V1
Vertical machining centerOkumaMB-66VB1
Vertical machining centerOkumaMB-46VA1
Jig milling machineIwashitaNK-2RB1
Surface grinderOkamotoPSG-64DX1
Profile grinderMitsuiMSG-200M etc.3
LatheWashinoLPT-35C1
Bench latheKitamuraKL-161
Upright drilling machineAshinaAUD-5001
Hardness testerAkashiAPK-B1
Electric furnaceThermalNO-21
Contour band sawAmadaV-4001
Air compressorMitsui SeikiZV15AS-R1
NB Seimitsu Co., Ltd.8
06

Company Profile

Company

Company nameNB Seimitsu Co., Ltd.
RepresentativeYosuke Nishimura, President & Representative Director
Address3831 Kamiide, Fujinomiya, Shizuoka 418-0103, Japan
TEL / FAX+81-544-54-2121 / +81-544-54-2120
EstablishedJune 21, 1974
CapitalJPY 45 million
Employees27 (as of October 2026)
DirectorsYosuke Nishimura (Representative Director), Ryota Ayukawa (Senior Managing Director), Masumi Okamura (Managing Director), Akane Sano (Director & General Manager)
BusinessDesign and manufacture of precision stamping dies; precision stamping (automotive, industrial equipment, optical equipment, connectors & terminals, etc.)
CertificationISO 9001:2015 (certified October 2019)
Main bankShizuoka Bank, Fujinomiya Branch
AffiliateNB Precision (Thailand) Co., Ltd. (Ayutthaya, Thailand)

History

Jun. 1974Founded NB Seimitsu in Saiwai-ku, Kawasaki, Kanagawa
Apr. 1976Incorporated as NB Seimitsu Co., Ltd.
Aug. 1985Built a new factory in Tsurumi-ku, Yokohama, and relocated
Aug. 1989Built a new die factory in Fujinomiya, Shizuoka
Aug. 1994Added a stamping plant to the Fujinomiya factory and consolidated the head office and all departments there
May 1999Established NB PRECISION (THAILAND) CO., LTD. in Thailand
Oct. 2014Introduced Mitsubishi MP2400 ultra-high-precision wire EDM
Oct. 2019Obtained ISO 9001:2015 certification
Mar. 2020Masashi Nishimura appointed Chairman
Mar. 2020Yosuke Nishimura appointed President & Representative Director
Nov. 2020Moved the Thai factory to a new plant in Rojana Industrial Park Zone 3
Jan. 2022Introduced Keyence LM-1000/1100 high-precision image dimension measuring system
Feb. 2024Introduced Komatsu H1F110-2 AC servo press
Jun. 202450th anniversary of founding

Corporate Philosophy

Motto: Enriching everyone's life through our technology
By striving to improve our technology every day, we meet our customers' requirements and contribute to the development of society.

Basic Management Policies: Customer satisfaction / Respect for people / Technology and quality / Compliance / Social contribution

Management Goals

Expand our core technologies with all employees. We call "core technologies" the technologies that support our business and allow us to continuously meet customer needs.

Taking on cutting-edge processing technologies / Continuous practice of ISO and 5S activities / Building an organization that does what it says / Close cooperation with customers and partner companies

Environmental Policy

Compliance with environmental laws / Efficient use of resources and energy / Building, operating and improving our environmental system / Communication and disclosure / Green procurement (established March 20, 2020)

NB Seimitsu Co., Ltd.9
07

Thailand Base

NB Precision (Thailand) Co., Ltd.

Our production base established in Thailand in 1999. In November 2020 it moved to a new factory in Rojana Industrial Park Zone 3, Ayutthaya. We supply parts of the same quality from Japan and Thailand.

Company nameNB Precision (Thailand) Co., Ltd.
EstablishedMay 1999
Address88/1 Moo 1 T.Banchang A.Uthai Ayutthaya 13210 (Rojana Industrial Park Zone 3)
BusinessPrecision stamping (15–200 ton); design, manufacture and sales of single-stage and progressive dies
Main equipment25 presses (10 progressive, 15 single-stage), 2 ultra-high-precision wire EDMs, 4 vision measuring systems and 1 3D profile measuring system
BOI approval1999: stamping / 2002: die manufacturing

Because dies are designed and built based on our own production results, we can reliably supply both mass-produced parts and dies. Automatic measurement with vision systems minimizes inspector-dependent variation in quality assurance.

Head Office & Factory

NB Seimitsu Co., Ltd.
3831 Kamiide, Fujinomiya, Shizuoka 418-0103, Japan
About 15 km from Fujinomiya Station (approx. 25 min by car)
About 19 km from Shin-Fuji IC (approx. 30 min by car)

Thai Factory

NB Precision (Thailand) Co., Ltd.
88/1 Moo 1 T.Banchang A.Uthai Ayutthaya 13210
(Rojana Industrial Park Zone 3)
Tel +66-35-721-707

Send Us Your Drawing

Tell us the material, thickness and quantity, and we will propose a process and a quotation.

Tel +81-544-54-2121

Fax +81-544-54-2120 / Mon–Fri 9:00–17:00 JST
E-mail
Web https://www.nb-sj.co.jp/en/
In Thailand: NB Precision (Thailand) Co., Ltd. Tel +66-35-721-707

QR https://www.nb-sj.co.jp/Website
NB Seimitsu Co., Ltd.10